Directional thrust boring machine UPKT-30B with a rotating (20 ton)

Directional thrust boring machine UPKT-30B to buy
Directional thrust boring machine UPKT-30B to buy
Directional thrust boring machine UPKT-30B to buy
Directional thrust boring machine to buy
Directional thrust boring machine to buy
Directional thrust boring machine to buy
Directional thrust boring machine to buy
Directional thrust boring machine to buy
Directional thrust boring machine UPKT-30B to buy
Directional thrust boring machine UPKT-30B to buy
Directional thrust boring machine UPKT-30B to buy

Look for all our trenchless equipment

The directional Thrust Boring machine UPKT-30B is a hydraulically driven tool for replacement or laying steel and PVC pipe. This machine can provide steerable thrust boring up to 100 meters, designed to install pipes and cables under driveways, walkways  and roads from a pit, sewer well or building basement. Using a special attachment, you can also perform a boring from the surface of the earth. 

The hydraulic reducer allows you to unscrew and tighten the drill rods quickly and without manual labor, it also greatly facilitates steerable boring, due to the hydraulic reducer, the work time is reduced.

Better to use the UPKT-30B in normal soil conditions, including winter ground.

This is most universal machine because can to work from surface or from pit, use of this machine will greatly increase your job production and decrease the cost of property restoration.

Work from the surface of the earth:
The machine is placed on the surface of the earth, the drill rods enter the ground at an angle, then the laying path changes to a horizontal plane, the drilling path can be changed, for example, so that the tip goes into the well or into the basement of the room or even to the surface of the earth.

Work from the pit or basement:
The machine is located in a pit or in the basement of the room, drill rods enter the soil in a horizontal plane, then the drilling path can be changed, for example, so that the tip goes into the well or into the basement of the room or even to the surface of the earth. Trajectory control is the same as in HDD installations, but here a special hydraulic reducer is provided for turning the rod string, the rod string is rotated by moving the valve control lever, which is much more convenient than manually turning with a pipe wrench.

The control of steerable thrust boring is provided by underground location systems such as Mark lll, DigiTrack, Subsite, ERA or SNS (Russian made) and others.

The UPKT-30B is perfect choice for connecting houses to gas pipelines, water, sewers, for laying electric cables, for laying communications under roads and objects.

Key Features:

  • steerable thrust boring at a distance of up to 100 meters;
  • powerful traction in compact  sizes;
  • compact and transportable, modular design;
  • possible installation at the work place without the crane, only by 2 people;
  • maximum preparation  time at the work place about 30 min;
  • does not require highly qualified workers;
  • simplicity in operation;

All our hydraulic power units based on the original industrial Honda engines, this is a proven reliable engine with long service life over the years, quality and performance Sauer-Danfoss hydraulic pumps are of European made, all hydraulic cylinders made according to European standards, we use only high-quality steel for a frame and European welding equipment. All equipment checks in real ground conditions before shipment.

Made in Russia, no any China parts.

World wide delivery, CE certification can be provided.

View all our equipment for trenchless laying of communications

Technical parameters: 
  • Thrust force 18 ton / Pull force 20 ton
  • Diameter of expansion, max 350 mm
  • Pulled pipe OD 325 mm
  • Boring length 100 meters
  • Piston stroke 320 mm
  • Torque (Nm) 900
  • Gasoline engine (Honda GX-390) 13 h.p.
  • Hydraulic pump capacity 21 l / min
  • Oil pressure max 250 bar
  • Carriage speed 1 m / min
  • Rod weight 6.6 kg, lenght L-550 mm 
  • Drill rod diameter 45 mm
  • Overall dimensions 1100 x 550 x 610 mm (L x W x H)
  • Machine Weight  171 kg
  • Hydraulic motor Weight 61 kg

Unassembled, the heaviest machine element weighs no more than 61 kg.

WHAT WILL BE INCLUDED IN THE KIT (AT YOUR CHOICE​)​:

1) Basic set: 25 meters of drill rods, not steerable boring, here there is no included sonde housing for the underground guidance system like DigiTrack, Mark or Eclipce;

2) Standard set: 50 meters drill rods, steerable boring, here in the kit included the sonde housing for underground guidance system like DigiTrack, Mark or Eclipce, the guidance system is not included in the price and must be purchased from us separately;

3) The maximum set: 100 meters of drill rods, steerable boring, here in the kit included the sonde housing for underground guidance system like DigiTrack, Mark or Eclipce, the guidance system is not included in the price and must be purchased from us separately;

At your request, we will add in the set the necessary reamers, pipe grips, drill rods and underground guidance system US, EU or Russian made.

How to buy


Call us: 
+7 (911) 282-00-44