Sewer well or Pit launch directional thrust boring machine UPKT-40B with a rotating (40 ton)

Directional thrust boring rig to buy
Directional thrust boring machine to buy
Directional thrust boring rig to buy
Directional thrust boring rig to buy
Directional thrust boring machine to buy
Directional thrust boring machine to buy
Directional thrust boring machine to buy
Directional thrust boring machine to buy
Directional thrust boring machine to buy
Directional thrust boring machine to buy
Directional thrust boring rig to buy

Look for all our trenchless equipment

Directional Thrust Boring machine UPK-40B is a hydraulic driven replacement tool, this machine can provide steerable thrust boring up to 150 meters.

The UPK-40B is a most universal machine because can to work from from ground surface, from round cement sewer well and from pit, UPK-40B can be fitted in a diameter of one meter sewer well.

Machine works great for electric lines or all pipes you need to install under walkways, drive roads, circular driveways, front porches and flower beds, better to use the UPK-40B in normal soil conditions.

Use of this machine will greatly increase your job production and decrease the cost of property restoration.

How to work from the surface of the earth:
The machine is placed on the surface of the earth, the drill rods enter the ground at an angle, then the laying path changes to a horizontal plane, the drilling path can be changed, for example, so that the tip goes into the well or into the basement of the room or even to the surface of the earth.

How to work from the round cement sewer well, from pit or basement:
The machine is located in a pit or in the basement of the room, drill rods enter the soil in a horizontal plane, then the drilling path can be changed, for example, so that the tip goes into the sewer well or into the basement of the room or even to the surface of the earth.
The path control is the same as in HDD rigs, but here a special hydraulic reducer is provided for turning the drilling rods, the rods is rotated by moving the valve control lever, which is much more convenient than manually turning with a pipe wrench.

The control of steerable thrust boring can be provided by underground location systems such as Mark, DigiTrack, Subsite, ERA or SNS (Russian made) and others.

The UPK-40B is perfect choice for connecting houses to gas pipelines, water, sewers, for laying electric cables, for laying communications under roads and objects.

Key Features:

- universality of application in any conditions;

- can works from a round sewer well with a diameter of 1 meter, from pit or basement, and from surface of ground;

- easy steerable thrust boring at a distance of up to 150 meters with a hydraulic driven rotating;

- compact and transportable;

- maximum deployment time at the facility 30 min;

- does not require highly qualified workers;

- simplicity in operation;

What do you get for your money:

All our hydraulic power units based on the original Honda engines, this is a proven reliable engine with very long service life over the years, quality and performance Sauer-Danfoss hydraulic pumps are of European made, all hydraulic cylinders made according to European standards, we use only high-quality steel for structures, we use the better European welding equipment. All equipment, without exception, undergoes rigorous checks before shipment. On their own training ground in real conditions are tested every new machine or every design decision.

All of the above guarantees the manufacturability and reliability of our equipment, our main customers are water utilities and municipal services of the Russian Federation, our equipment is also exported to Europe, USA, to the Baltic States and the CIS countries.

Made in Russia, 3 year warranty, there is no any China parts.

World wide delivery, CE certification can be provided.

View all our equipment for trenchless laying of communications

Technical parameters: 
  • Thrust force 38 ton / Pull force 38 ton
  • Diameter of expansion, max 350 mm
  • Pulled pipe OD 325 mm
  • Boring length 150 meters
  • Piston stroke 320 mm
  • Torque (Nm) 1500
  • Gasoline engine (Honda GX-690) 24 h.p.
  • Hydraulic pump capacity 36 l / min
  • Oil pressure max 250 bar
  • Carriage speed 3 m / min!
  • Rod weight 8 kg, lenght L-550 mm 
  • Drill rod diameter 50 mm
  • Overall dimensions 886 x 576 x 397 mm (L x W x H)
  • Machine weight  350 kg
  • Hydraulic power unit weight 250 kg

WHAT WILL BE INCLUDED IN THE KIT (AT YOUR CHOICE​)​:

1) Basic set: 25 meters of drill rods, not steerable boring, here is not included the sonde housing for the underground guidance system like DigiTrack, Mark or Eclipce;

2) Standard set: 50 meters drill rods, steerable boring, here in the kit included the sonde housing for underground guidance system like DigiTrack, Mark or Eclipce, the guidance system is not included in the price and must be purchased from us separately;

3) The maximum set: 100 meters of drill rods, steerable boring, here in the kit included the sonde housing for underground guidance system like DigiTrack, Mark or Eclipce, the guidance system is not included in the price and must be purchased from us separately;

3) The Pro set: 150 meters of drill rods, steerable boring, here in the kit included the sonde housing for underground guidance system like DigiTrack, Mark or Eclipce, the guidance system is not included in the price and must be purchased from us separately;

At your request, we will add in the set the necessary reamers, pipe grips, drill rods and underground guidance system like ERA or SNS Pro (Russian made).

How to buy


Call us: 
+7 (911) 282-00-44